Santa Fe™ Max Dry Dual XT





Studies show that as much as 50% of the air in the upper levels of your home comes from the basement or crawl space. This air typically contains high levels of moisture. As a result, it causes musty odors and symptom-triggering allergens such as mold spores, mildew, bacteria, and dust mites. This damp air in your crawl space or basement may damage the structure of your home, flooring, furniture, and other personal items stored in these spaces. That’s why it is so important to control the relative humidity in these areas with a Santa Fe Dehumidifier.



Santa Fe™ Max Dry Dual XT



The Santa Fe™ Max Dry Dual XT is the most energy efficient dehumidifier on the market. It effectively dehumidifies up to *2,500 square feet and is the ideal unit for meeting aggressive energy use targets. The Santa Fe™ Max Dry Dual XT is engineered for extremely quiet operation and is optimized for low heat load.


Contact Us to Find Your Local Healthy Basement Contractor

 




                                                                                                                                                                                                                                                                                    
Part Number: 4031470
Blower: 391 CFM @ 0.0" WG
Power: 530 watts @ 80°F and 60% RH
Supply Voltage: 115 volt – 1phase – 60 Hz
Current Draw: 8.0 amps
Operating Temp.: 56°F Min., 95°F Max.
*Sized For: (Refer to website for more sizing considerations)
Crawl Space
Very Tightly Sealed Up to 3,700 Sq. Ft. (18,500 Cu. Ft.)
Moderately Sealed Up to 2,900 Sq. Ft. (14,500 Cu. Ft.)
Some Leaks & Imperfections Up to 2,500 Sq. Ft. (12,500 Cu. Ft.)
Basement
Very Tightly Sealed Up to 3,000 Sq. Ft. (30,000 Cu. Ft.)
Moderately Sealed Up to 2,700 Sq. Ft. (27,000 Cu. Ft.)
Some Leaks & Imperfections Up to 2,500 Sq. Ft. (25,000 Cu. Ft.)
Minimum Performance at: 80°F and 60%RH 70°F and 60%RH
Water Removal: 155 Pints/Day 85 Pints/Day
Efficiency: 8.8 Pints/kWh 7.8 Pints/kWh
Energy Factor: 4.2 L/kWh 3.7 L/kWh
Air Filter: MERV-11, Standard Pleat
Size: 16” x 22” x 2”
Power Cord: 9', 115 VAC, Ground
Drain Connection: 3/4” Threaded Female NPT
Drain Hose: 8' Direct Gravity Drain Hose
(5/8” ID x 7/8” OD)
Refrigerant Type: R410A (Refer to manufacturers label for
more information)
Refrigerant Amount: 1 lb., 13 oz.
Dimensions: Unit Shipping
Width: 20.25” 25”
Height: 21.75” 28”
Length: 38” 42”
Weight: 164 lbs 156 lbs
Optional Accessories:
4021475 MERV-11 Filter (16" x 20" x 2")
4027420 MERV-11 Filters 4-Pack
4027424 MERV-11 Filters 12-Pack
4024969 Filter MERV 6 (16x20x2)
4028612 4 Pack
4028613 12 Pack
4021468 Pre-Filter
4028614 Pump Kit
4028616 Caster Kit
4028522 12 Pack
4021475 Filter MERV 11 (16x20x2)
4027417 4 Pack + 1 Pre-Filter
4027424 12 Pack
4028607 Supply Duct Kit
4026969 10" Flex Duct
4022126 10" Flex Duct (Insulated)
4027441 Register Head 10"
4028610 Return Duct Kit
4024750 12" Flex Duct
4028366 12" Flex Duct (Insulated)
4028646 Register Head 12"
4028772 14" Register Grill (White)
4020175 Remote Dehumidistat

 
    • Dual exhaust outlets allow for air distribution to multiple locations

    • Horizontal solution is ideal for basement or crawl space application

    • Engineered for extremely quiet operation

    • The most energy-efficient large capacity residential dehumidifier on the market

    • Large capacity water removal of 155 pints/day

    • MERV-11 Filter provides superior air filtration

    • Engineered for low temperature operation and the air flow issues that crawl spaces present

    • Ducting options for divided spaces

    • Auto restart allows the dehumidifier to automatically restart after a power outage


Recommended Installations for Ducting to Finished Areas


    • Place the Santa Fe™ Max Dry Dual XT in the unfinished area of the basement, near a drain access (condensate will drain via gravity or with an optional pump kit).

    • Using the supply duct collar, supply the dry air from the dehumidifier into a large, open area in the finished and unfinished sections of the basement.

    • Place a return grill / passive vent on the other side of the wall that separates the finished and unfinished areas. This will allow for a circular air flow throughout the basement.

    • The passive grill will prevent the unfinished room from being placed under a negative pressure and also allow the dehumidifier to focus on keeping the unfinished area dry as well.

    • The on-board dehumidistat control can be used on the unit for this application or a 120 volt dehumidistat can be placed in the finished basement as well (we recommend using an electrician to run the wiring).

    • Be sure to keep all doors open to any other rooms in the basement to help with proper air circulation (bedrooms, bathrooms, etc.)


    • Place the Santa Fe™ Max Dry Dual XT in the unfinished area of the basement, near a drain access (condensate will drain via gravity or with an optional pump kit).

    • Using the supply and return duct kit, supply the dry air from the dehumidifier into a large, open area of the finished and unfinished sections of the basement. Use the return duct kit to draw air back through the dehumidifier.

    • Be sure the return and supply are at least 10 feet away from each other for proper air flow throughout the basement. Add a passive grill between the finished and unfinished areas (*or have a 2” gap under the door separating the two rooms). This will help keep the unfinished area dry as well.

    • Use the 120 volt, wall mounted dehumidistat for this installation for proper run time on the dehumidifier (we recommend using an electrician to install the separate 120 volt control).

    • Be sure to keep all doors open to any other rooms in the basement to help with proper air circulation (bedrooms, bathrooms, etc.)


Find Your Local Dealer Hover Icon Find Your Local Dealer Icon

Find Your Local Healthy Basement Crawlspace Contractor

Find Now

Free Inspection Hover Icon Free Inspection Icon

Free Inspection

Get The Right Solution